DroneBridge installer

Flash your Wi-Fi connector.

Install the current DroneBridge firmware directly from your browser. No ESP-IDF or desktop flasher is required.

XIAO ESP32-C3 only

Connect and install

  1. Use Chrome or Edge on a desktop computer.
  2. Connect one XIAO ESP32-C3 with a USB data cable.
  3. Select Connect and flash, then choose the new USB serial port.
  4. Keep the board connected until the installer reports success.
This browser does not support Web Serial. Open this page in desktop Chrome or Edge. Web Serial requires a secure HTTPS page.

If the board will not connect

Hold BOOT, tap RESET, release BOOT, and try again.

After installation

Join DoveBridge 1 using dronebridge, then open 192.168.2.1.

This installer applies the XIAO telemetry profile and Automatic Hybrid Wi-Fi. It first tries router dovebridge-router with password dronebridge, then exposes the fallback hotspot above.